Skip to main content

Trio Kenwood KD-1033 turntable main bearing service

  One of my first posts in this blog was regarding the servicing of the Pioneer PL12D turntable, and that has proven to be the most popular by a significant margin. The Pioneer PL12D had its competitors, and probably the most popular alternative was the Trio Kenwood KD-1033 turntable. I use both names (Trio and Kenwood) as the company operated under different names in different markets. In the UK they were Trio, possibly because the brand Kenwood was most famous here for food blenders. 95% of a KD-1033 is similar to  Pioneer PL12D, and servicing them is very much the same process. Both are belt drive , have an AC synchronous motor,  mechanical speed change , a main bearing, sprung top deck and rubber motor mounts. the KD-1033 uses a different type of anti skate mechanism, employing a thread and weight. The plinth is shallower with an internal cross brace. One aspect that is different is the design of the main bearing, and servicing it is a little harder than a PL12D. The Pioneer main b

Reducing the energy consumption of Sky+ HD recorder and Samsung LED TV

Common themes across most of my posts are energy conservation , its monitoring and technology. This post sort of combines all three in one.

We have a Sky+ satellite unit with integral hard disk recorder. In the UK this is known as a Sky+ box. The unit can be programmed to easily record programmes 24 hours per day and record complete series at a repeating time. It has lots of features, including OnDemand  services where a wide range of channels are recorded on the off chance you might want to watch them. My specific Model Sky + HD unit is made by Amstrad

We also have a 46" Samsung LED TV which is hooked up to the Sky+ unit .

I use a CurrentCost household energy monitor, which is hooked up to the internet via a unit called a netsmart, also from CurrentCost (see my other post on currentcost). I can see on a web page a graph of my household energy consumption in close to real time. A 3rd type of device from CurrentCost is the Individual Alliance Monitor (IAM) which is a unit which plugs into the mains socket and an individual appliance plugs into it. It enables me to record and chart the consumption of any single device i.e the TV. I have two of these IAM devices which separately get recorded via the netsmart and so I can measure the energy consumption and patterns of consumption over time.I move them around to try to understand the patterns of consumption of different appliances i.e fridges , computers, fridges etc. It keeps me out of trouble.

Recently I moved the IAMs and connected them to the Sky+ unit and the Samsung TV, really just to see actually how much energy a fairly modern TV + hard disk recorder would consume.

Both devices are never turned off at the wall. The Sky+ unit has to stay on in order to record programmes throughout the day based on our families choices - that's what hard disk recorders do. The TV is turned off via the remote, but the wall socket is hidden away and inconvenient to disconnect.

I'm often hearing about the "evils" of standby mode and wanted to test to see if this is the case. I know you can buy so-called "Green" mains multi-way adapters which enable you to turn things off absolutely, even when hidden away using a master switch or remote. Trouble is that disk recorders need to be always on, or risk missing a programme set to record, and my TV mains socket was inaccessible. It has no electromechanical switch, just a power off mode on the remote which leaves a red LED glowing.






In this chart you can see a red line indicating the power consumption of the Sky+ unit and the purple line indicating the power consumption of the Samsung LED TV. This was captured after I had set the Sky+ units ECO standby mode and you can clearly see the period of minimal consumption


After a few days I had built up a set of charts from the IAM's which were quite revealing :

1) The Samsung LED TV used 100 watts when in use. When in standby i.e turned off via the remote it used no measurable power or rather registered 0 on the IAM device, effectively zero consumption.

2) The Sky+ HD unit varied from 15 watts to 25 watts, over the day, depending on function. Standby mode (amber light) instigated from the remote power button registered  15 watts. Watching TV live this goes up to around 20 watts and 25 when the hard disk is working i.e recording or playing an existing recording. The more it has to do , the more power it consumes. fair enough.

So, in an extreme case,   if the TV is left on for 24 hours, then the household will have consumed 100 watts * 24 hours = 2400 watts or 2.4 Units of electricity which would cost 34.8p.

 Realistically if the household watched the TV for 4 hours , this would be 400 watts or .4 of a Unit. Which equates to 5.8p

The SKY+ Unit would consume between 15 * 24 = 360 watts per day for a day of no recording or use,  through to an upper limit of 25 * 24 = 600 watts or 0.6 units per day which equates to 5.22p minimum to 8.7p per day if in continuous use

At time of writing the average price of a unit (kWh) of electricity in the UK is 14.5 p

I was a little surprised by how little energy both devices used. The Sky+ unit has many of the characteristics of a PC i.e a mother board, a hard drive etc..

I was interested to see if I could improve their performance using the provided configuration settings.

1) The TV. The Samsung TV has a very wide range of configurable settings via the remote controls .

via the Green Menu button  -> Picture -> ECO solution. Within ECO solution I could set two optional settings , Auto-brightness which adjusts the screen brightness based on background light conditions i.e brighter when the room is brighter, darker when the room is darker. I could also set the ECO Mode setting itself to be low, medium or high i.e the total amount of brightness cut. I set it to low  i.e. a small brightness cut,  and set the Auto-brightness to auto.



Via the IAM chart, this showed a drop from 100 watts down to between 60-70 watts. Some fluctuation over the day which I put down to salient light conditions. However this is a respectable 30watts saving per hour, which is the same as swapping a 40 watt conventional bulb for a low energy equivalent. Experimenting further, setting the high ECO setting took the power consumption down to 45 watts, so a 55 watts saving per hour, though this varied with the light  i.e more savings in the evening or when the room was darker.

In this chart you can see the purple line of the TV power consumption. At the start of the graph the ECO-mode is set to high and you can see a reading of around 45 watts. This drops to effectively Zero when the TV is turned off with the remote. A few unexplained spikes occur, though the larger of these was setting the TV's ECO mode to light. When the TV is used again we can see consumption of around 70 watts with some downward fluctuation, consistent with the revised ECO setting. This chart also shows the Sky+ unit fluctuating from 15 to 25 watts depending on its function across the day. When used in the evening the TV was watching a recorded programme , hence the commensurate rise in the sky+ consumption as the hard drive is used

I found the high mode rather grainy and settled on the light ECO setting which didn't appreciably affect the picture .

2) the Sky+ unit.

From the remote if you select Services from the remote, then Options, you can set Standby Mode to ECO. This function turns the unit off at night for a period IF no programmes need to be recorded during that period.

Two other things I set were

  •  Services -> Customise . I disabled both Pushed On Demand and On Demand Downloads. I do not need the unit to speculatively record programmes on my behalf.

  • From the Setup option on the top of the Sky menu under Picture, I set the SCART control setting to off. I don't know if this saves energy but as the TV only uses the HDMI connection, I figured disabling SCART could only be a good thing.

After a few days monitoring of the Sky+ Unit, I could see that between certain hours at night the unit would sometimes power down completely, consuming no detectable power. Typically this was between 3:30 and 6 am, so 2.5 Hours when the unit was not using 25 or even 15 watts. on some days this mode does not engage as I assume this is where a recording falls within this period.

A further adjustment would be to double check that all the Scheduled recordings you are making are needed, as there is a knock on power implication to recording especially during the night power-down period. Hence setting the ECO standby mode has a potential  saving of  2.5hours * 15 watts which is 37.5 watts over 24 hour period . 


These savings are small, as if I watch 4 hours per day of TV I'm saving 120 watts from the TV settings, and possibly a further 37.5 watts from the Sky using ECO standby  if no planned recordings fall during the night period. So that's around 160watts  over a 24 hour period,  which is 2.33p.

Over the year that is 58.4 KwH which I believe equates to approx 30 Kg of CO2 ** or  £8.46, assuming 14.5p per unit cost. These appliances use reasonably low amounts of power . However the savings cost me just a few minutes of changing a few settings on my TV and Sky+ box , and save me a bit of money over the year and help reduce my CO2 footprint, albeit by a pretty small amount. If everyone did it , it could be significant


**Calculating the CO2 impact of electricity savings is hard as the precise amount of CO2 per KwH or electricity produced varies with the mix of generating technology on-line  supplying to the National Grid. An assumption of 0.5 Kg of CO2 per KwH has been used and is in line with Government approved figures

Comments

Anonymous said…
Thanks for your work on this. I, too, found the Sky+HD drawing about 13W on standby - I expected lower. I'll use your configuration tips to see if I can reduce it. --Pete
Alen said…
awesome, nice explained articles,
thank you so much :-)
Andy said…
Thanks, good tip about disabling speculative On Demand downloads. This feature could be handy if you were on a slow connection but if you've got enough bandwidth to stream video it's not needed.
Anonymous said…
This in inspirational. I have one of the new virginmedia superhubs and I am going to try something similar and post the results. Many thanks.
Paul Clark said…
Useful figures for the Sky+ box, thanks!

Just one thing, could you perhaps tighten up on use of Watts and Watt-hours? "Watts per day" doesn't make sense... :-)

Popular posts from this blog

Restoring a Pioneer PL-12D Turntable

 I got back into vinyl records about 18 months ago, and have collected a few hundred albums, mostly second hand. I have a number of turntables (NAD 5120, Ariston QDeck, Pioneer PL12D ) which I got also second hand. I keep a few, some end up passed onto friends, some that are too far gone are kept for spares. In most cases they have required a little work to get them running again. Last week I was lucky enough to get a Pioneer PL-12D turntable from freecycle. The lady who offered it, said that she in turn had received it from freecycle , and had replaced the belt but couldn't get on with the springiness of it, and had got a modern USB turntable. I have previously worked on one of these decks, and know what she means about the suspension system used. While this blog is specifically about this particular model of deck, many of the concepts are similar to others from this vintage. Many Japanese belt drive decks throughout the  1970's shared very similar construction, so this ma

Bracing IKEA EXPEDIT or KALLAX cabinets for greater rigidity when used with a turntable

The inevitable problem, too many records. Turntable and amplifier on top Like many record collectors around the world, I have a number of IKEA cube cabinets from both their EXPEDIT (older) and KALLAX (newer) ranges. These are easy to make, cheap to buy and perfect for record storage. The system comes flat packed and uses bolts and dowels to hold the system together. If you follow the instructions  the system is strong and should not collapse. You can augment the joints with PVA wood glue for extra strength. My turntable sits on top of an EXPEDIT 2x4 cabinet, laid along the long side, with some felt feet to support it from the floor, and you can use KALLAX in the same way. It's been great but has two problems I wanted to address : 1) Because the system has no back panel, the records  can be pushed too far back. 2) While the structure is strong and fairly rigid, there was some lateral movement. With heavy equipment on top, I found that if I nudged or knocked either top side, this all

a vintage Sonab 85S / Yamaha CP-500 turntable

The Sonab 85S turntable You'll see from this blog that I'm interested in vintage audio equipment , especially turntables and speakers. I keep an eye on ebay for potential bargains, and saw this turntable listed quite close to me and for a very good price, £60 buy it now, including 45 adapter, dust bug, DIN adapter, record clamp and a very nice Shure M95 cartridge. Condition listed as very good and with the original sonab headshell. I've been interested in this deck for sometime, as to my eyes , it's a particularly nice design, with the very simple tonearm and deep chassis. I was aware that the model , from the late 70's was a cooperation between Swedish manufacturer Sonab and Yamaha. I don't know how much was contributed by which firm, but the same deck, or one very similar is also to be found as the Yamaha CP-500, though typically in teak rather than black. There were two Sonab models , the 75 and 85, the former being a manual  deck, the latter an automatic, an